Brother INTELLIFAX 600 - Manual (Page 84)

SENDING FAXES
I
E N T E R F A X N 0 . I
I ALTERNATE |
P R E S S S T A R T K E Y
O 0 ©
0 0©
0 0©
0 © o
C A L L I N G
You will now be prompted to enter fax number. Select the
destination fax number, by entering it manually, or using
one-touch or speed-dial, then press START.
When the document has been transmitted, the unit at the
receiving station rings.
C A L L P I C K U P
If the receiving party answers, your unit will also ring.
You can now pick up the handset and talk. If the receiving
party does not answer and you have previously selected CALL
BACK MESSAGE "ON", a call back message will be printed
at the receiving station instead.
Note:
- If you have not registered your telephone number at station
ID (see page 6-6), you cannot send a call back message.
- If an errors occurs during the transmission of the fax itself
the CALL RESERVATION function will not operate.
- There are certain types of fax machine which will not respond
to the CALL RESERVATION function.
- When auto redialing, CALL RESERVATION will be
canceled. But, if you select CALL BACK MESSAGE "ON",
the unit will send a call back message after sending the
document.
- You can not use CALL RESERVATION with either the
timer or polling function.
- If you set the CALL RESERVATION then set up a timer
(delayed) transmission, the CALL RESERVATION and
CALL BACK MESSAGE will be canceled.
- An example of the call back message is shown on page 13-8.
8-16