S.coverpage comment (only for lntellifax650m), System setup – Brother INTELLIFAX 600 User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SYSTEM SETUP
S.Coverpage Comment (Only for lntelliFAX650M)
The IntelliFAX650M can send an electronically generated
coverpage with any fax that is transmitted. Any one of three
preset and two user-definable comments can be added to this
coverpage.
The coverpage comments are identified by numbers, as
follows:
1. (COMMENT OFF)
2. PLEASE CALL
3. URGENT
4. CONFIDENTIAL
5. (USER DEFINED)
6. (USER DEFINED)
6 . S E T U P S Y S T E M
lo store your own coverpage comments in the Intelli-
FAX650M:-
mo.
6 . S E T C O V E R P A G E
SET
] O R [
5 . T
5 . T O P S E C R E T
After selecting the SETUP SYSTEM, press the 6 key.
6.SET
COVERPAGE
will appear in the display, then press the
SET key.
You will be prompted to select the number of the coverpage
comment you wish to store.
Press the cursor key to select the number of the coverpage
comment that you wish to store, then press the SET key.
Use the numeric keypad to enter the text of the coverpage
comment (which can be up to 27 characters) in the way
described in the section of
Using The Numeric Keypad To
Enter Text (page 4-5).
SET
Press the SET key to confirm the entry.
6 . S E T C O V E R P A G E
The display will revert to 6. SET COVERPAGE. If you wish
to change another system setting, press a number key,
otherwise press STOP to exit.
6-10