Brother INTELLIFAX 600 - Manual (Page 60)

SYSTEM SETUP
5. Remote Code
Faxes can be received through the use of an external telephone
or an extension telephone.
You can activate the fax machine from a remote telephone.
This is useful if you are using the machine on an extension of
a key telephone system.
Remote activation allows you to receive a call on a telephone
which is either connected from the fax unit, or is parallel
connected to your line (extension telephone), but is not located
near the fax unit. If an in-coming call is a fax transmission,
simply enter the remote code on the external/ extension
telephone (tone-type) to enable reception of the fax.
Note:
- If you accidentally pick up your extension or external
telephone by mistake when you are transmitting at receiving
a fax, there might be some slight distortion on the document.
- If you wish to pick up a telephone call remotely from an
extension telephone during F/T ringing, you can use the
remote deactivation code.
Registering Remote Code
6. S E T U P S Y S T E M
■©
5 .
R E M O T E C O D E
SET
Use the following procedure to register a remote code.
After selecting the SETUP SYSTEM function, press the 5 key.
5.REMOTE CODE will appear in the display, then press the
SET key.
An alternating display will prompt you to select remote
activation ON or OFF using the cursor keys, then press the SET
key.
] O R [
If you wish to change the current setting, press one of the cursor
keys, otherwise press the SET key to exit.
6-8