Brother INTELLIFAX 600 - Manual (Page 48)

SETTING THE USER OPTIONS
5.F/T Ring Time
5 . U S E R O P T l 0 N S
---\
JKL .-—V
3“ ©
5 . F / T R I N G T I M E
sfr
1
R I N G T I M E : 3 0 S E C |
\ ALTERNATE t
S E L E C T ^ ^ & S E T
In F/T answer mode, when the IntelliFAXhUU/bSUM answers
an incoming call and detects that it is not a fax being sent, it
will output a simulated ringing tone from the speaker to alert
the user that there is an incoming telephone call or manually
transmitted fax. The F/T RING TIME option sets the time for
which this ringing occurs, before the IntelliFAX600/650M
reverts to fax receiving mode. The F/T switch monitors for fax
tone (CNG) during F/T ring time. All automatic transmissions
must generate CNG tone to meet CCITT specifications. More
detailed information about the F/T switch and reception of
faxes is given on page 9-1.
To set the F/T ring time:
After selecting the USER OPTIONS, press the 5 key.
5. F/T RING TIME will appear in the display, then press the
SET key.
An alternating display will prompt you to change the F/T ring
time setting using the cursor keys, then press the SET key.
OR
R I N G T I M E : 1 0 S E C
OR
SET
5 . F / T R I N G T I M E
O ©O
0 00
0 ©0
O ©0
OR C
If you wish to change the current setting, press one of the cursor
keys, otherwise press the SET key to exit.
As soon as you press a cursor key, the display will stop
alternating and only the selection line will be displayed.
Use the cursor keys to select 10, 20, 30 or 60 seconds.
Press the SET key.
The display will revert to 5.F/T RING TIME.
If you want to set another user option, press a number key,
otherwise press the STOP key to exit.
5-6