Selecting a location, Connecting the handset, Selecting a location -3 – Brother INTELLIFAX 600 User Manual
Page 22: Connecting the handset -3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION
Selecting A Location
The following points should be kept in mind when selecting a place to set up your fax
machine.
•
Place the fax machine on aflat, stable surface such as a desk or stand.
• Select a place where the machine will not be subjected to bumping or excessive
vibration.
• Do not set it up in a high-traffic area.
•
Locate the unit near a telephone wall jack and a standard, grounded power outlet.
• Avoid setting up the machine near heaters, air conditioners, water, chemicals or
refrigerators.
•
Avoid direct sunlight, excessive heat, moisture, or dust.
•
Do
not connect the unit to electrical outlets controlled by wall switches or automatic
timers. Disruption of power can wipe out information in the unit’s page memory.
•
Do not connect the unit to electrical outlets on the same circuit as large appliances
and other equipment that might disturb the power supply.
•
A void interference sources, such as speakers or the base units of cordless telephones.
Connecting The Handset
1) Connect the handset by locating the insert opening on the left side of the telephone cradle
and plugging in the curled handset cord.
Push firmly and listen for the click as it locks in place.
2) Insert the other end of the handset cord in the opening at the mouthpiece end of the
handset. This should click into place as well.
2-3