Brother INTELLIFAX 600 - Manual (Page 29)

BASIC OPERATION
3. BASIC OPERATION
The Control Panel
1. Hook
A summary and brief description of the controls and indicators
on the IntelHFAX600/650M control panel is given below. This
should be used with reference to the accompanying, numbered
diagram of the control panel. More detailed descriptions of the
function of each control will be found in the relevant section
of this manual.
HOOK
o
2. Hold
This key is used to dial telephone or fax numbers without
lifting the handset.
For automatic transmission, neither the HOOK button nor the
handset are necessary for transmission.
HOLD o
This key is used to put an incoming call on hold.
(Pressing this key a second time will cancel the hold status.)
3. Redial/Pause
REDIAmUSE
O
4. Speed-Dial Key
This key has two functions. When numbers are being stored in
the auto dialing memories, PAUSE inserts a short delay into
the number at the point where the PAUSE key is pressed. For
more information on PAUSE see page 7-2.
If an outgoing call fails to be connected for any reason,
pressing REDIAL allows the number to be re-dialed.
Automatic re-dialing is also available on the IntelliFAXbOO/
650M. See pages 5-4 for more information.
SPEED DfAL
o
The SPEED-DIAL key is pressed before entering a two-digit
speed-dial (abbreviated code) number for dialing. Pressing this
key tells the IntelHFAXfinn/fi50M to expect an abbreviated
code instead of a full-length, manually-dialed number. For
more information on storing and using speed-dial numbers, see
page 7—5 and 8—1.
3-2