Cabletron Systems 2E43-51R - Manual (Page 34)

Chapter 3: Installation
3-10 2E43-51/2E43-51R User’s Guide
To connect an RJ21, proceed as follows:
1. Ensure that the device connected to the other end of the segment is
powered on.
2. If using an RJ21 straight connector, plug it into the appropriate RJ21
port as shown in
Figure 3-6 or, if using the RJ21 angle adapter
supplied with the device, insert the RJ21 angle adapter as shown in
Figure 3-7 . The RJ21 angle adapter allows the cables to be dressed
along the front of the device and easily attached to the strain-relief
bracket when using a right-angled RJ21 connector.
Figure 3-6 Straight Cable Connection
Figure 3-7 Connection Using the RJ21 Angle Adapter
6
5
LINK 1
LINK 1
12
12
ENET 4
ENET 2
RJ21
Screw
Screw
2251-10
22511-73
RJ21 Angle Adapter
Screw
Screw
Clip
Clip
6
5
LINK 1
LINK 1
12
12
ENET 4
ENET 2
RJ21Right-Angled
Connector