Cabletron Systems 2E43-51R - Manual (Page 25)

2E43-51/2E43-51R User’s Guide 3-1
CHAPTER 3
INSTALLATION
This chapter provides the instructions required to install the 2E43-51.
Follow the order of the sections listed below to correctly install the
2E43-51.
• Required Tools ( Section 3.1 )
• Unpacking the 2E43-51 ( Section 3.2 )
• Installing Options ( Section 3.3 )
• Installing the 2E43-51 (on a shelf or tabletop, or into a standard rack)
(
Section 3.4 )
• Connecting to the Network ( Section 3.5 )
• Completing the Installation ( Section 3.6 )
3.1 REQUIRED TOOLS
A Phillips screwdriver is required to install the 2E43-51 in a rack.
Only qualified personnel should install the 2E43-51.