Cabletron Systems 2E43-51R - Manual (Page 120)

Chapter 5: Local Management
5-72 2E43-51/2E43-51R User’s Guide
The Switch Statistics screen displays the following fields:
Port # (Read-Only)
Identifies the network port. Table 5-6 shows the port organization.
Frames Rcvd (Read-Only)
Displays the number of frames received by the port since last power-up or
reset.
Frames Txmtd (Read-Only)
Displays the number of frames transmitted by the port since last power-up
or reset.
Frames Fltrd (Read-Only)
Displays the number of frames filtered by the port since last power-up or
reset.
Frames Frwded (Read-Only)
Displays the number of frames forwarded by the port.
CLEAR COUNTERS (Command)
This command clears all the counters of the ports displayed to zero. To
clear the counters, use the arrow keys to highlight CLEAR COUNTERS
at the bottom of the screen, then press ENTER.
Table 5-6 Port Organization
ENET 1 = Network Port 1, 10 Mbps Fast Ethernet Slot 5 = Port 5
ENET 2 = Network Port 2, 10 Mbps Fast Ethernet Slot 6 = Port 6
ENET 3 = Network Port 3, 10 Mbps HSIM Slot = Port 7
ENET 4 = Network Port 4, 10 Mbps