Cabletron Systems 2E43-51R - Manual (Page 158)

Appendix C: Optional Installations and Mode Switch Bank Settings
C-6 2E43-51/2E43-51R User’s Guide
• Switch 7 – Clear NVRAM. Changing the position of this switch resets
NVRAM on the next power-up. All user-entered parameters, such as
the IP address, device names, etc., are reset to the factory default
settings. Once the 2E43-51 resets, you can either use the factory
default settings or reenter your own parameters.
• Switch 8 – Reset Password/Community Strings. Changing the
position of this switch clears user-entered passwords stored in
NVRAM, and restores the factory default passwords on the next
power-up. Once the 2E43-51 resets, you can either use the factory
default settings or reenter your own passwords.
NOTE
Do not change the position of switch 8 unless it is necessary to
reset the module super-user configured passwords to their
factory default settings.