Connecting to a local printer, 2connecting to a local printer – CNET ecopy Printer/Fax/Scanner/Copier User Manual

Page 34

Setting Up the Scanner

Connecting to a Local Printer

You can make a USB connection be-
tween this machine and a printer,
when you want to use it as a local
printer for Print Scan. This section ex-
plains how to connect a printer to this
machine using a USB cable.

Note

❒ When you connect a local printer

to this machine, be sure to use the
USB cable that comes with this ma-
chine.

❒ See the manuals that come with the

printer you are going to connect to
this machine, for details about the
printer’s connections and setup in-
formation.

AAAA

Turn off the power of this ma-
chine.

BBBB

Insert the USB interface card that
comes with this machine to the
PC Card slot on the rear panel of
this machine.

Note

❒ Make sure that the card is se-

curely inserted, until you feel
the card click into place.

Important

❒ If you remove the USB interface

card while the machine’s power
is on, it is necessary to restart
the machine.

CCCC

Connect a USB cable to one of the
USB ports of the USB interface
card.

DDDD

Connect the other end of the USB
cable to the USB port of the print-
er.

Important

❒ You cannot use more than one

printer as a local printer for
Print Scan at the same time.
When you connect two or more
printers to the machine using
USB cables, the printer that is
detected by this machine first is
only available.

ADG006S

ADG007S