Checking transmission results, P.137 “checking transmis, Sion results – CNET ecopy Printer/Fax/Scanner/Copier User Manual

Page 145

Performing Scan Operation

137

Checking Transmission Results

Follow the steps below to check transmission results using the Web Status Mon-
itor on a client computer.

AAAA

Start a Web browser, and then enter this machine's IP address in the ad-
dress bar.

Reference
See p.85 “To access this machine from a web browser”

Note

❒ You can confirm the IP address of this machine by selecting [IP Address] in

[1.System Settings]

under the Scanner Features menu.

The top Page of the Web Status Monitor appears.

BBBB

On the main menu, click [Admin Info.].

CCCC

On the sub-menu, click [Send Info.].

DDDD

Check the transmission result.

Note

❒ Up to 20 transmission results are displayed in the [Send Info.] list at a time.

Each time you perform a Send Scan operation, the list is updated and only
the latest 20 transmission results are displayed.

❒ The transmission results are cleared when the power of this machine is

turned off.

❒ In the [Status] column, [Standby], [Sending], [Complete], or [Not Sent] is dis-

played.

❒ If an e-mail or a file could not be sent for any reason, [Not Sent] appears in

the [Status] column.

❒ The [Send Type] column indicates the type of transmission: [E-mail], [SMB],

[FTP], [Delivery] or [Print Scan].

❒ The number of original pages that are scanned appears in the [Pages] col-

umn.