CNET ecopy Printer/Fax/Scanner/Copier - Manual (Page 158)

Sending Scan File by Scan to FTP
150
8
Selecting an FTP Server
You can select a single FTP server as a
destination to which you send a
scanned file. Follow the steps below
to select an FTP server.
AAAA
Press the {{{{1}}}} key.
Note
❒ You can skip this step when the
E - m a i l / S e n d F i l e s t a n d b y
screen is displayed.
The E-mail/Send File standby
screen is displayed.
BBBB
Press [Dest.].
Note
❒ If “ On ” is selected for [Auto Up-
date Destination List] in [2.Send
Scan Settings] under the Scanner
Features menu on this machine,
the destination list is automati-
cally updated when you press
[Dest.]
. See p.61 “Auto Update
Destination List” for details.
CCCC
Press the {{{{1 1 1 1}}}} or {{{{0 0 0 0}}}} key to high-
light [FTP], and then press [Set-
tings]
.
The list of the FTP servers that are
registered to this machine appears.
DDDD
Use [Next] and [Prev.] to scroll
through the pages, and display
the FTP server name you want to
select.
EEEE
Use the {{{{1 1 1 1}}}} and {{{{0 0 0 0}}}} keys to
highlight the FTP server name
you want to select, and then press
[Select]
.
This selects the check box next to
the FTP server name.
Note
❒ Because you can select only one
FTP server, selecting another
FTP server automatically dese-
lects the FTP server currently
selected (so the check mark next
t o t h e F T P s e r v e r n a m e i s
cleared).
To recall FTP servers using a title
A Press the {{{{./*}}}} (Title) key.
List of titles appears on the
screen.
Note
❒ Titles are displayed accord-
ing to the settings in [Configu-
ration]
→ [Basic Settings] →
[Scanner]
→ [Select Title] on
the Web Status Monitor.
www.cnet.ie