CNET ecopy Printer/Fax/Scanner/Copier - Manual (Page 141)

Making Scan Settings
133
6
C Highlight the option you want
to select by using the {{{{1 1 1 1}}}} or
{{{{0 0 0 0}}}} key, and then press [OK].
Note
❒ Pressing [Cancel] discards the
selected option, and returns
to the previous screen.
❒ When you select “ Custom
Resolution ” for [Resolution]
and/or “Custom Area Set-
ting” for [Scan Size], use the
number keys to specify the
values.
D Repeat steps B B B B and C C C C as nec-
essary.
E When you are finished, press
[PrevMenu] .
This returns to the Scan Settings
screen.
F Press [OK].
This returns to the E-mail/Send
File standby screen, and the cur-
rent scan settings are displayed
on the third line of the screen.
Confirming the Scan Settings
You can confirm the current scan set-
tings, or the scan settings that you
have registered to [Default], [User 1],
[User 2] or [User 3].
Note
❒ You can confirm the [Default] set-
tings by selecting [Manual] in step B
below, unless you configure the
scan settings manually. After you
have manually configured the scan
settings, selecting [Manual] displays
the current settings.
AAAA
Press [Scan].
The Scan Settings screen is dis-
played.
BBBB
Use the
{{{{1 1 1 1}}}} or {{{{0 0 0 0}}}} key to high-
light [Manual], [User 1], [User 2] or
[User 3]
on the screen, and then
press [OK].
The status screen appears.
CCCC
Use [Next] and [Prev.] to display
the setting of the setup item you
want to confirm.
DDDD
When you are finished, press [Ex-
it]
.
EEEE
Press [Cancel] or [OK].
Note
❒ If you want to apply the scan
settings you selected in step B ,
press [OK]. If you want to exit
the status screen without chang-
ing anything, press [Cancel].
This returns to the E-mail/Send
File standby screen.
www.cnet.ie