CNET ecopy Printer/Fax/Scanner/Copier User Manual

Page 172

Printing Scanned Image Files

164

To recall a registered print
settings

A Use the {{{{1

1}}}} or {{{{0

0}}}} key to

highlight [User 1], [User 2] or
[User 3]

on the screen, and then

press [OK].
This returns to the Print Scan
standby screen, and the corre-
sponding print settings are dis-
played on the third line of the
screen.

To configure print settings
manually

A Use the {{{{1

1}}}} or {{{{0

0}}}} key to

highlight [Manual] on the
screen, and then press [Set-
tings]

The first page of the Print Set-
tings screen ( Print Settings 1/2)
is displayed.

B Use the {{{{1

1}}}} or {{{{0

0}}}} key to

highlight the setup items you
want to change, and then press
[Settings]

Reference
See p.79 “Information to Reg-
ister in [Print Settings]” for
details about each of the set-
up items.

C Highlight the option you want

to select by using the

{{{{1

1}}}} or

{{{{0

0}}}} keys (and [Next] or [Prev.]

if necessary), and then press
[OK]

Note

❒ Pressing [Cancel] discards the

selected option, and returns
to the previous screen.

❒ When you select [Custom

Size]

, use the number keys to

enter the dimensions of the
scan area (width and height).

D Repeat steps B

B and C

C as nec-

essary.
When you are finished, make
sure that the first page of the
Print Settings screen (Print Set-
tings 1/2) is displayed.

E Press [Next].

The second page of the Print
Settings screen (Print Settings
2/2) is displayed.

F Use the {{{{1

1}}}} or {{{{0

0}}}} key to

highlight the setup items you
want to change, and then press
[Settings]

Note

❒ If you change the settings in

[Enlarge]

, [Reduce] and [Create

Margin]

, only the latest setting

that you have selected within
all of these setup items ap-
plies.

G Highlight the option you want

to select by using the

{{{{1

1}}}} or

{{{{0

0}}}} keys, and then press [OK].