CNET ecopy Printer/Fax/Scanner/Copier User Manual

Page 182

Appendix

174

Exceeded Job Delivery Data Max.

Scanning will be stopped and

the scanned data will be delet-

ed.

[Exit]

Scanning of the first original has failed.

• Confirm the setting in [4.Scan Settings]

→

[Scan Type]

. If “ Colour:Full Colour ” is se-

lected, change to another option. “ Black
and White:Text ” is good for scanning most
monochrome originals, and even “ Black
and White:Text/Photo ” is enough for
scanning originals in 2 colors (e.g. an origi-
nal containing text printed in black and
charts drawn in red).

• Confirm the setting in [4.Scan Settings]

→

[Resolution]

. Specify a lower resolution, if

the current setting is unnecessarily high.
Normally, 200dpi or lower resolution set-
ting is enough for scanning text.

• Set [Compression (Black and White)] in [2.Send

Scan Settings]

to “ On ” when [Scan Type] in

[4.Scan Settings]

is set to one of the “ Black

and White ” options.
Set [Compression (Gray Scale/Full Colour)] in
[2.Send Scan Settings]

to an option that is

higher than the current setting, when [Scan
Type]

in [4.Scan Settings] is set to one of the

“ Colour ” options.

• Make the value of the following settings

larger using the Web Status Monitor:

• [Configuration]

→ [E-mail Settings] → [E-

mail]

→ [Max. E-mail Size] when sending

scan data as an e-mail attachment

• [Configuration]

→ [Delivery Settings] →

[Delivery]

→ [Job Delivery Data Max. Set-

ting]

when sending scan data using a

delivery server

• [Configuration]

→ [File Send Settings] →

[File Send]

→ [Job Delivery Data Max. Set-

ting]

when sending scan data to a Win-

dows shared folder or an FTP server

Exceeded Job Delivery Data Max.

Send the current scanned data

or delete to cancel this job.

[ Delete ]

[ Send ]

Scanning of the second or subsequent original
has failed.

• To send the data up to the previous page

scanned, press [Send]. After the

B mark on

the screen disappears, press the

{{{{Start}}}} key

to scan the remaining pages.

• If you press [Delete], scanned data is delet-

ed and the document is not sent. Try scan-
ning with such settings that make data size
smaller, or perform scanning several times
to create a number of separate files, each of
which file size is small enough for a Send
Scan operation.

Message

Possible Cause and Required Action