CNET ecopy Printer/Fax/Scanner/Copier - Manual (Page 188)

Appendix
180
11
Cleaning
R WARNING:
R CAUTION:
We recommend periodically cleaning
the scanner to ensure that it is in opti-
mum operating condition. First, wipe
off the scanner with a dry, soft cloth.
Next, dampen a soft cloth with water,
wring it out tightly, and then wipe off
the scanner. Use a neutral detergent
for exterior portions of the scanner
where soiling cannot be removed
with water alone. Wipe off the rubber
rollers with ethyl alcohol, and then
wipe with a cloth dampened with wa-
ter. Finally, wipe off the rollers and
exterior with a dry cloth to remove
any excess moisture.
Important
❒ Do not use volatile chemicals such
as benzene, paint thinner or spray
with insecticides. This can cause
deformation, discoloration and
cracking.
❒ Wipe off the Automatic Document
Feeder (ADF) with a dry, clean
cloth when there is dust or soiling
present inside.
Cleaning the Exposure Glass,
ADF Exposure Glass, White
Sheet, and White Plate
R CAUTION:
AAAA
Turn off the power of the scanner
and unplug the power cord from
the outlet.
BBBB
Wipe off the scanner with a dry,
soft cloth.
1. White Plate
2. White Sheet
3. ADF Exposure Glass
4. Exposure Glass
• Never remove any covers or screws oth-
er than those specified in this manual.
The inside of the scanner contains high-
voltage components that can cause elec-
trical shock. Have all inspections, ad-
justments, and repairs inside the
scanner performed by an authorized
dealer only.
• Do not attempt to modify this scanner in
any way. Modification can cause fire
orelectrical shock.
• When disconnecting the power cord, al-
ways make sure to hold onto the plug.
Do not pull on the power cord itself.
This can cause damage to the cord, fire
or electrical shock.
• Be careful not to pinch your fingers
when closing the Automatic Document
Feeder (ADF).
ADG017S
www.cnet.ie