Cub Cadet Yanmar 3TNV72 - Manual (Page 248)

ALTERNATOR
TNV IDI Service Manual 11-15
Alternator
3. Position the stator assembly (Figure 11-13, (1))
on the front frame housing studs.
4. Lubricate the shaft of the rotor assembly
(Figure 11-14, (1)). Press the rotor assembly
into the front frame housing (Figure 11-14, (2))
and rear frame housing (Figure 11-14, (3)).
Figure 11-14
5. Align the front frame housing with the rear
frame housing. Reinstall the two bolts
(Figure 11-15, (1)) and two nuts
(Figure 11-15, (2)).
Figure 11-15
6. Reinstall the insulation bushing
(Figure 11-16, (4)) and nut (Figure 11-16, (3)).
Figure 11-16
7. Reassemble the regulator assembly
(Figure 11-16, (1)) to the holder
(Figure 11-16, (2)).
8. Reinstall the brush holder (Figure 11-17, (3)),
springs (Figure 11-17, (4)) and brushes
(Figure 11-17, (5)).
9. Reattach the regulator assembly and holder to
the rear frame housing.
Figure 11-17
10. Reinstall the rear cover (Figure 11-17, (2)) to
the rear frame housing with three bolts
(Figure 11-17, (1)).
100266A
2
1
3
0000265A
1
2
3
4
1
2
0000258A
3
4
5
1
2
0000257A
TNV_IDI_ServiceManual_(3TNV72 for YN only).book 15 ページ ２００７年１１月２９日 木曜日 午後２時５８分