Cub Cadet Yanmar 3TNV72 - Manual (Page 129)

ENGINE
6-30 TNV IDI Service Manual
Cylinder Head
3. Finish installing the valve guides
(Figure 6-25, (1)) to the proper height
(Figure 6-25, (3)) using the valve guide
installation tool (Figure 6-25, (2)). See valve
guide projection specification on page 6-6.
Figure 6-25
Reassembly of Intake and Exhaust Valves
IMPORTANT
Always install new valve stem seals.
The exhaust valve stem seals are different
than the intake valve stem seals and can be
identified by the color the seal spring
(Figure 6-26, (4)). Ensure they are installed
in the correct locations.
1. Oil the lip of the valve stem seal
(Figure 6-26, (2)). Using the valve stem seal
installation tool (Figure 6-26, (1)), install a new
valve stem seal on each of the valve guides
(Figure 6-26, (3)).
Figure 6-26
2. Measure the distance (Figure 6-27, (1)) from
the cylinder head to valve stem seal to ensure
proper clearance (Figure 6-27, (2)) between
the valve guide and seal. See valve stem seal
projection specification on page 6-6.
Figure 6-27
3. Put the cylinder head assembly on its exhaust
port side.
4. Install all the valves (Figure 6-28, (6)) in their
proper location in the cylinder head.
Engine Model
Marking
Intake Exhaust
3TNV72
White (Seal
Spring)
Black (Seal
Spring)
0001756A
(3)
(2)
(1)
(3)
(2)
(4)
(1)
0001873B
(1)
(2)
0001874
TNV_IDI_ServiceManual_(3TNV72 for YN only).book 30 ページ ２００７年１１月２９日 木曜日 午後２時５８分