Panasonic KX-F220 - Manual (Page 78)

PRINTING REPORTS AND LISTS
Activity Report (JOURNAL Report)
The JOURNAL is a record of the last 30 transactions (transmission and receptions). When you set the JOURNAL to
AUTO, it is printed automatically after every 30 transactions. It may also be printed on request.
This function has been preset to AUTO (Default).
Selection is as follows:
•AUTO ...................... Prints a report every 30 transactions automatically.
• MANUAL................. Prints a report of last 30 transactions.
(1)
JUL.29.1989
(2)
3:16 PH
* (3)
No.
(4)
OTHER FPCSIMILE
(5)
START TIME
(6)
USAGE TIME
(7)
TX PAGES
(8)
RX PAGES
(9)
RESULT
01 Panasonic C JLIL.29 3:04FH 00’31 01 00 OK
02 Panasonic C JUL.29 3:-05PH 00’39 00 B1 OK *
1; 03 Panasonic fl JUL.29 3:07PM 00’19 00 00 IIGC02)
04 Panasonic B JUL.29 3:08PH 00’58 01 01 OK
¥■ 05 Panasonic fl JUL.29 3:10PM 00’28 01 00 OK
06 1238756 JUL. 29 3:13PM 00’35 00 00 MGC02J *:
07 Panasonic B JUL. 29 3:15PN 00’34 00 01 OK
Explanation of JOURNAL
(1) Print date: Month/Date/Year
(2) Print time: HourMinute
(3) Communication number (up to 30)
(4) Dial number
5263057: The other party’s number dialed
manually is 5263057.
INCOMING: Document or telephone call is
received.
Company XXXXX; Station name
(5) Communication start time
(6) Usage time: Minute’Seconds
(7) Number of pages transmitted successfully
(8) Number of pages recieved successfully
(9) Communication result
OK: Successful communication
Numeral: Error code (See ERROR CODE below)
CODE DESCRIPTION CODE DESCRIPTION
01 When the power supply overheats.
Allow unit to cool. 06 When the unit is out of paper.
Check paper.
02 When transmission is interrupted by pushing
the STOP/CLEAR button. 07 When the cover is opened.
Check Cover Latch.
03 When a document is jammed or does not
feed into the unit.
Check paper path.
08 When the paper is jammed.
Re-install the recording paper.
04 When transmission/reception error occurs. 09 When Password Communication failed.
Confirm that your password correcponds to
the other facsimile unit.
05 When the printhead overheats.
Allow unit to cool.
1-57