Set default, The set default setting, Note – Panasonic KX-F220 User Manual

Page 126: Changing parameter, Test [print or motor, The test switch, Test[print or motor, System programming functions

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SYSTEM PROGRAMMING FUNCTIONS

(CONT.)

SET DEFAULT

The SET DEFAULT setting;

All parameters return to initial setting (default) excluding LOGO (#01) and YOUR LOGO (#02).

NO: Parameters do not return to initial setting (Default).
YES: Parameters returns to initial setting.

NOTE:

Once you set to "YES”, the parameters you have programmed are erased.

Changing parameter

Press

MENU

4 times.

•The PROGRAM indicator will light.
•This display will appear.

PROGRAM[1.DATA 2.TEL

3.SYSTEM 4.REPORT]

Press then press “26”.

26.SET DEFAULT=NO

[1.NO 2.YES]

SET

Press

“2”,

then press

SET.

Press

“2”,

then press

SET.

26.SET DEFAULT=YES

[l.NO 2.YES]

PARAMETER RESET OK?

=YES [l.NO 2.YES]

Press

MENU

to end the operation.

THU JUN29 3:00PM 00

TEST [PRINT OR MOTOR]

The TEST switch;

This function is useful for PRINTER testing and MOTOR testing switches.

OFF: Does not function. (Default)

PRINT: Prints the test pattern. (Refer to "MOTOR AND PRINTER TESTING" on page 29 in INSTALLATION

MANUAL.)

MOTOR: Rotates the document feeder and printer motors. (Refer to “MOTOR AND PRINTER TESTING” and

"MAINTENANCE” in INSTALLATION MANUAL.

4-17