4 select file – DVR systems WatchNET Software User Manual

Page 87

NDVR Server Manual

When you press the smart button, you should select the area percent by

single clicking the right mouse, if the motion percent of the area above the

select percent, it will be shown out.

Note:

Press synchronic button while smart search is running, system will end

smart search;

The sensitivity of the smart search is same as motion detection. If you set

a very low sensitivity, system will search even that there is no motion in the

specified area. Contrarily, if you set a high sensitivity, it is possible that system

will not search when there are some small range motions in the specified area.

So you should set the sensitivity according to the surroundings.

4.2.4 Select file