DVR systems WatchNET Software - Manual (Page 67)

NDVR Server Manual
67
2.6 Digital matrix setup
2.6.1 Matrix setup
【Matrix Group】System operator can set a groups of video images to
be sent out through matrix decode card, each group has different display
mode. Up to 16 groups you can set.
【Video Out Port】Select the output port of Matrix card that you want to
set, the total number of channels is decided by Matrix Decoder card.
【Video Out Standard】Set Matrix video out standard, you can select
from PAL and NTSC.
【Video View Mode】Select video output display mode, there are 1split
, 4 split , 6 split , 9 split and 16 split .
【Video Window】【Display Video Camera in window】After selecting
video split mode, there will have corresponding display video window, select
one camera or several cameras to show in the window. The Video cameras
you can select are cameras of the local board card and IP Cameras. For
cameras of board card, system use soft decoding to play to TV Wall, total