DVR systems WatchNET Software - Manual (Page 18)

NDVR Server Manual
18
1920*1080. When you want to run NDVR, the resolution should be set
as 1024*768 at least.
1.4 Main Interface
1.4.1 Show tips
1. When the mouse moves closely or stops above a button, a text tip will
be shown to interpret the function of it immediately.
2. Zoom in/out video image: Left-Double-Click a camera window to zoom
in/out video image (or press F11 on the keyboard ).
3. System will detect cards and read the total channel automatically, and
the corresponding number will be displayed dynamically.
4. Recording status:
--The icon means the system is recording continuously;
-- This icon means the system is recording manually.
-- This icon means the system is recording in motion detection.
-- This icon means the system is recording in sensor detection.
1.4.2 Screen menu
After user enable keyboard shortcut , you can press TAB key or Page
Down (select next camera window) and Page UP (select previous camera
window) key on keyboard to select a window.
Users can Single-Right-Click image area (compression card camera
windows, IP product camera windows and unused windows) to popup the
screen menu as below:
1. Full screen
User can Single-Right-Click image area to popup the screen menu, then
select ―Full Screen Display‖ to view image area in full screen (or press F12 on
the keyboard). When you want to restore, you should Single-Right-Click image
area and select
―Restore Display‖.