DVR systems WatchNET Software User Manual

Page 30

NDVR Server Manual

First, you should select the ptz camera and set the preset. Then, you

should select the detected camera, which is showed as

. Next,

select the detected area named Zone01 like the green frame. If you select the

number is 64, the total of the zone is 64, you can detect the number of areas is

64. When the detected area motions, the ptz camera will link to the preset you

set.

If you don

’t want to use the motion link ptz preset function, you should

press

again, then the motion detection is enable as below: