DVR systems WatchNET Software - Manual (Page 48)

NDVR Server Manual
48
【Time Format】Select time format from the drop-list. After you change
the format it will affect the OSD format, information in information display panel
and file lists.
【Default Camera type】Set the default mode of video from PAL and
NTSC, it is available when the input video is lost and for the decoder to
playback local video to TV Wall.
【Grab picture save to】Select the path to save the captured pictures.
【Preview Split Mode】Select window split mode for NDVR between
―Normal Mode‖ and ―Wide Screen‖. You would better select ―Wide Screen‖
when you are using wide screen monitor. You should re-select the view
window number to refresh the window split mode status.
【HS Card 4CIF Mode】Select the HS Card 4CIF Mode function disable
or enable.
【Language】Select one kind of language to use. Generally speaking,
there is ―English‖ only. But we can add some other kinds of language
according to your requirement.
Note:
If you want to use the dual monitor function, you must make sure the
hardware and the system support the dual monitor first. When there are more
than two monitors connected and all the settings are done, the software can
realize dual-monitor function automatically. For more details about
dual-monitor, please refer to Appendix F: Dual Monitor.
2.1.2 Network setup
【Remote Connection】Select using network or not. If select ―disable‖, it
will not permit any client connect this NDVR system;
【Remote Connect Port】Select remote connection port for Clients.
【Remote buffer Priority】There are three items selected. ―Smooth‖
demands the system have large buffer.
―Real-time‖ demands there is enough
bandwidth. Otherwise, the data will be off and on over and over when it is sent
though the network.
【PDA Connection】Select whether allow PDA connect to NDVR system.
If select
―disable‖, it will not permit any PDA device connect this NDVR system.
【PDA Connect Port】Select remote connection port for PDA device.
【Automatic Alarm Notification client IP】Assign a network client to
receive alarm message when there is an alarm. The alarm channel image will