DVR systems WatchNET Software - Manual (Page 138)

NDVR Server Manual
138
【Voice Alert Repeat】Select playback repeat time from 1 to 3.
【Image Memory】To use the image memory function, select On.
【Built-in Memory】The current memory space of the built-in memory is
displayed.
【Over Write】Select On to overwrite the file or not when there is
insufficient memory space to record the image in the built-in memory.
On: Overwrite is enabled and old files will be overwritten in the order of
date.
Off: Overwrite is prohibited. No recording will be performed.
【Capacity Warning】Select On to send a warning mail to the
Administrator when the memory space of the built-in memory is low or the
memory is full. Select Off if you do not want to send a warning mail.
Note:
When Overwrite is set to On, the warning mail will not be sent to the
Administrator.
【Alarm Recording】Select On to record the image and audio file in the
built-in memory linked with alarm detection.
【Image File Name】Type the file name you want to assign to the images
to be recorded. You can use up to 10 alphanumeric characters, - (hyphen) and
_ (underscore) for naming.
【Suffix】Select a suffix to be added to the file name.
【Sequence Number Clear】Click Clear to reset the Sequence number
suffix to 1.
【Alarm】Select the alarm to be linked with the recording of image and
audio files.
Sensor input: The external sensor that is connected to sensor input of
the camera I/O port.
Motion detection: The alarm by the motion detection function.
【Effective Period】Set the period during which alarm detection is
effective.
Always: The alarm detection is always effective.
Schedule: You can specify the period during which alarm detection is
effective. Choose Schedule and the setting menu for the effective period is
displayed.