DVR systems WatchNET Software - Manual (Page 76)

NDVR Server Manual
76
【Max Bit Rate】Select the maximum bit rate for Variable Bit Rate (VBR)
record.
【Show LOGO/ OSD/ Week】If you check those boxes, system will show
corresponding information on screen.
【Position】Set the position of OSD or Logo by entering the X and Y
coordinate directly.
【OSD】Set the display attribute of the OSD & LOGO. There are four
types of display modes: Clarity-Glitter, Clarity-Not Glitter, Not Clarity-Glitter
and Not Clarity-Not Glitter.
【OSD Type】Select the type of OSD for the Week.
【Privacy Mask】You can check this box to set the privacy mask on the
below image directly, and you can clear some privacy masks by pressing
button.
【Record schedule】You can set record schedule in following chart.
Note:
This record schedule is only available to EM-NDVR. There are 4 time
segments every day. Every segment has a start time, an end time and a record
type. The time segment is set in
sequence; every segment can’t be
overlapped, included or skipped with any other.
【Copy to】After finishing one channel, if you want to set any other
channels’ configuration as the same as this camera, you can select channel
number from drop-list, and press button.