DVR systems WatchNET Software - Manual (Page 119)

NDVR Server Manual
119
When the driver is installed incorrectly, you should uninstall it first.
Then, single-right-click and select ―Scan for hardware changes‖ to install
the new driver manually.
Sometimes, it will ask you for the location of your drivers. You should
locate where the drivers are and select the right path to install the correct
drivers.
When all the installations are done, you can see the interface as below:
In WIN7
Insert Cards and install drivers
In WIN7, when you single-right-click on one of the drivers
’ names and
enter its properties in Device Manager, its location will be described as below
(marked with red box):