DVR systems WatchNET Software User Manual
Page 57
NDVR Server Manual
57
【Pre-Event Record】Select the start time of record when there is an
alarm. When NDVR system is in Motion Detect mode or Sensor Detect mode,
it can record video before the alarm is trigged.
【Post Record Time】Select the end time of record when there is an
alarm. When the system is in Motion Detect mode or Sensor Detect mode, it
can record video after the alarm end.
【Record Audio】Select whether program record audio data or not, this
setting is not available for IP Cameras, for stream type of IP Camera, you
Recording Schedule Setup (Set for cameras of local board cards and IP
Cameras.)
Tips:
One block of pane
means half an hour. Firstly click record mode icon
, then click schedule diagram, hold down the mouse and move it to select
large area (Drag & Drop).
1. Normal Record (green): NDVR system always record video (e.g.
Sun.);
2. Sensor Record (red): NDVR system begins to record video only when
there are POS or ACU actions(e.g. Monday);
Note:
The time setup must be corresponding with Check Alarm setups in Sensor
setup otherwise it can
’t work properly.
3. Motion Record (Blue): NDVR system begins to record video only
when it detects moving object (e.g. Tuesday.);