DVR systems WatchNET Software - Manual (Page 24)

NDVR Server Manual
24
2. Videos play in sequence mode switch
Press button to switch among all cameras in current windows in
sequence when current partition number is less than total channels .You can
press again to cancel the switch. But at first, you must confirm that
Camera Sequencing Interval in system setup has been set enable.
3. Emergency recording button
Press button to trigger recording for selected window for 30
seconds even if they have been set to record by any other modes. This
function is useful to deal with emergency when quick response is required.
4. Image capture
Press button to save an image for selected camera to local disk for
reviewing or printing. It will ask you for file name and save path when you use
to capture pictures for the first time. Next time, it will save to the previous
path directly.
5. Manual record switch
Press button to record manually for selected camera and press it
again to stop recording.