DVR systems WatchNET Software - Manual (Page 111)

NDVR Server Manual
111
After you installed mobile client in your smart phone, you should be sure
that your smart phone connect with Internet correctly. Currently, mobile
providers support WAP and WEB access point, mobile client must use Internet
as access point (AP) to access NDVR Server remotely.
6.4 Login Interface
After you downloaded and installed the MobileDvr software, you can run it
on your mobile phone to enter the login interface.
【Addr】Fill the IP address or domain name of the NDVR server.
【Port】Fill the port through which connects to NDVR Server.
【User】/【Pass】Fill the valid user with its password to visit server from
MobileDvr. And the server has enabled rights management, login user ID and
password from client will be checked. If the user has no right to visit that
camera, the connection will be cut down automatically.
Press Login button to connect with the NDVR server.
6.5 Camera List
The MobileDVR will enter the Camera List after you connect with the
NDVR server successfully.
When the camera you want to view is selected, click
―Options‖ and then
select
―Preview‖ to enter the preview GUI.