DVR systems WatchNET Software - Manual (Page 75)

NDVR Server Manual
75
This section contains the parameters to designate a name for every
camera connected, to enable or disable show LOGO and OSD, and to set
display type of OSD & LOGO as well as record resolution, record type, record
quality and frame rate, etc.
【Camera】Select the camera to be set from the drop- list.
【Camera Name】Enter a name description for easy identification.
【Frame Rate】Select the record rate of camera from drop-list.
【Midstream】【Sub Stream】Select Midstream or Sub Stream for the
current cameras.
【Resolution】Set the resolution at which the video files will be recorded.
Choices are DCIF, CIF, QCIF, 2CIF and 4CIF. The higher the resolution is, the
more disk space needed.
【Stream Type】Select video and audio or only video record.
【Image】Set the quality of the image to be recorded. Select from worst,
worse, normal, good and best.
【Bit Rate Type】Select bit rate type from Variable Bit Rate (VBR) and
Fixed Bit Rate (FBR) record:
VBR range= Poorest, Poor, Medium, Good, Best.
FBR range = 45 Megabytes/Hour to 400 Megabytes/Hour.