DVR systems WatchNET Software - Manual (Page 38)

NDVR Server Manual
38
(3). Delete IP camera device
Press button to delete connected server. When system is in
processing to add IP camera device (
―connecting…‖indicated in connect status
column), user cannot delete that IP camera device.
(4). Decode card work mode
NDVR system supports playing video of IP Camera to TV wall directly,
and then it uses the hard decoding function of decoder, so you should set the
work mode of decoder. If you
don’t use hard decoding, you can’t output video
of IP Camera real-time, user can only play back recording data to TV monitor
by selecting Playback to TV Monitor function.
Note:
Each WTE4002MD card can decode 2 channels D1 or 4channels CIF.
Each WTE4004MD card can decode 4 channels D1 or 8 channels CIF.
When you select the work mode, system will send out corresponding
channels of IP camera from the first IP camera. It will not influence soft
decoding for cameras of local board cards. If you enable hard decoding, then
all the images of cameras will be displayed in overlay model, adversely, all the
images of cameras will be displayed in off screen model.
17. Pos/Acu Function Setup\Event Monitor
We will introduce the Pos particularly in Pos Manual.
1.4.5 Network panel
This panel displays the network configuration of NDVR system.