DVR systems WatchNET Software - Manual (Page 78)

NDVR Server Manual
78
【PTZ Address】Set the address of the decoder, which must be matched
with the value of dipswitch in the PTZ.
【Speed】Set the speed of the PTZ.
【Preset position & schedule setup】Define preset position and set time
to call preset position automatically. System can add and delete plan time.
【Name】 Set the name for the current preset. 【Preset】 Set the preset
number for the current camera Add the preset by current
configuration. Delete the finished Preset. Call the Preset if
the Mode is Call preset. The mode is save preset; you should save the preset
and shouldn’t call the preset.