DVR systems WatchNET Software - Manual (Page 36)

NDVR Server Manual
36
(1). Add IP camera device
Press button to add an IP Camera device:
【Server Name】Set a name for the new IP camera device for easy
identify.
【IP Address】Input the address of the IP Camera, it is an IP address or IP
alias of the IP camera which is connected through DNS Server.
【Connect Port】Set the port through which connects to IP Camera.
【Login user ID/Login Pass】When the user want to visit IP Camera and the
server has used the function of rights management, login user ID and
password will be checked. If the user has no right to visit that camera, the
connection will be cut down automatically.
【Device Name】Select the corresponding name for the IP camera. Now our
software supports the following types of IP products: E Series DVR, ACTi IP
Cameras, AXIS IP Cameras, Arecont Vision IP, CC-Series Cameras,
DC-Series Cameras, HC-Series Cameras, H-Series Cameras, Huviron
Cameras, Mobotox Cameras, Sony Ip Cameras
【Video Stream type】If you want to use the Record sub stream function in
the IP device, you should select the data stream type Double Stream.
Select the Main-stream or sub-stream for the device, the main-stream and
sub-stream could be set in the following interface: