DVR systems WatchNET Software - Manual (Page 33)

NDVR Server Manual
33
If it is set to appear automatically, when the sensor is triggered, the map
will appear automatically and the sensor being triggered will be marked. For
triggered camera, user can Left-Double-Click it to view its video.
13. Play back to TV Monitor
In NDVR system, the recording data of 40 series card and some IP
cameras (except Mega IP cameras) can be transmitted to TV monitor via
Matrix card.
When system runs ―Playback to TV Monitor‖ process, the Matrix card will
output recording data. If this process does not run, matrix decode card will
output real-time video to monitor according to your matrix board setup .
Otherwise, when you use matrix card to decode video data from IP Camera,
you can’t use this function to play back recording video data to TV Monitor but
only output real-time video of local board and IP Camera to TV Wall according
to your setting in Matrix setup. In this process, you can play back record file by
date and camera, and the record file will be played automatically.