CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 - Manual (Page 54)

9145E NID Software User’s Manual Port Information
Link Status
46
5.1 Link Status
Link Status informs you of the current link status of the User, Network, and Management UTP ports of the
9145E and provides information on User and Network Port SFP transmit (Tx) and receive (Rx) power.
From the Port Information screen (Figure 5-1), select Link Status (1) and press Enter. The Link Status
screen (Figure 5-2) opens. Press Esc to return to the Port Information screen.
Figure 5-2 Link Status Screen
5.2 Port Configuration
Use the Port Configuration functions to obtain hardware information, view and modify the functional and
VLAN configurations, manage the various port filters, and to add, delete, and edit VLAN controls.
At the Port Information screen (Figure 5-1), select Port Configuration (2) and press Enter. The Port
Configuration screen opens. The following paragraphs describe each item on the Port Configuration menu.
Press Esc to return to the Port Information screen.
Figure 5-3 Port Configuration Menu
Canoga Perkins Corp. Ethernet Network Interface Device 12-SEP-2008
Model 9145E-101-2-0 V02.10 F121 02:59:35
----------------------------------------LINK STATUS-------------------------------------------
User Port Link Up
Network Port Link Up
MGMT UTP Port Link Down
SFP
Status:
User SFP Rx Power N/A
User SFP Tx Power N/A
Network SFP Rx Power N/A
Network SFP Tx Power N/A
Press ESC to return to previous screen
---------------------------------------------Messages----------------------------------------------
Canoga Perkins Corp. Ethernet Network Interface Device 22-SEP-2008
Model 9145E-101-2-0 V02.10 F121 02:59:35
------------------------------------PORT CONFIGURATION----------------------------------
1) Hardware Information
2) Functional Configuration
3) VLAN Configuration
4) Port Filters
5) Port Based VLAN Control
Select [1-5]:
---------------------------------------------Messages----------------------------------------------