CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 - Manual (Page 21)

System Configuration 9145E NID Software User’s Manual
IP/SNMP Agent Configuration
13
3.1.3 Host Table
The Host Table menu (Figure 3-5), configures the 9145E to send and receive SNMP, FTP, and Telnet traffic
to the Managing Host IP address, and access from specific Telnet clients when Telnet security is enabled
(Figure 3-6). Use the Host Access Table to configure access by each host including access type and
privileges (SNMP, FTP, Telnet).
Figure 3-5 Host Access Table Menu
Performance Maintenance (PM)
√ √
N/A
Service Availability Monitoring (SAM)
√ √
N/A
Function Management IP Test IP Auxiliary IP
Canoga Perki ns Corp. Ethernet Network Interface Devi ce 12-SEP-2008
Model 9145E-101-2-0 V02.10 F121 02:59:35
--------------------------HOST ACCESS TABLE--------------------------
Managing Host Tel net FTP SNMP SNMP V1/V2c Rd V1/V2c Wr V1/V2c
IP/Mask Bits Access Access Access Protocol Community Community Acces
172.016.002.070/32 All All
None N/ A N/A N/ A N/A
172.016.002.072/32 SSH Al l Wri te V1/V2c/V3 private Operat
172.016.002.154/32 All All Wri te V1/V2c/V3 public private Observ
172.016.004.034/32 All FTP Wri te V1/V2c Public Observ
172.016.150.011/32 All All Wri te V1/V2c/V3 Observ
172.016.150.013/32 All All Wri te V1/V2c/V3 public private Superv
173.016.005.072/32 All SFTP Write V1/V2c/V3 Public Private Obser
Select [(A)dd, (D)elete, (E)dit, (M)ore]:
---------------------------------Messages----------------------------------