CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 - Manual (Page 14)

9145E NID Software User’s Manual Getting Started
Login
6
2.3 Login
The first screen is the Login Screen (Figure 2-2). Type your Username and press Enter. The Password
prompt will then appear. Type your Password and press Enter. If the Username or Password are incorrect,
you will return to the Username Prompt and the message Invalid Username/Password entered will be
displayed.
CAUTION: Default username is admin and the default password is admin (lower case).
Canoga Perkins strongly recommends you change the Default Username
and Password during your initial configuration session.
Figure 2-2 Login Screen
When you successfully log in, the Main Menu (Figure 2-3) opens. Use the Main Menu to access all 9145E
functions, including setup, diagnostics, and reports.
Refer to “Account Configuration” on page 24 and “Password Configuration” on page 22 for information
about configuring you account and changing your password.
CAUTION: Should you lose both your Username and Password, the unit will need to
be returned to Canoga Perkins for Factory Service and reset.
Canoga Perkins Corp. Ethernet Network Interface Device 09-SEP-2008
Model 9145E-101-2-0 V02.10 F121 19:03:55
------------------------------LOGIN SCREEN---------------------------
Please Enter Login Username : admin
Please Enter Login Password : admin
-------------------------------Messages------------------------------