CANOGA PERKINS 9145E Network Interface Device Software Version 2.1 - Manual (Page 41)

System Configuration 9145E NID Software User’s Manual
Hardware Information
33/(34 Blank)
Syslog Server Mask - Define the level of severity of the messages to be send. There are eight (8)
levels of severity as defined in RFC 3164. The severity levels from highest to lowest are:
Emergency: - System is unusable.
Alert: - Action must be taken immediately.
Critical: - Critical Condition.
Error: - Error Condition.
Warning: - Warning Condition.
Notice: - Normal but significant condition.
Informational: - Informational messages.
Debug: - Debug level messages. If you specify Debug, then all messages are sent about the 9145E.
If you specify Error, then all errors that are Emergency, Alert and Critical are sent.
3.9 Hardware Information
The Hardware Information screen displays information about the 9145E, including the full model number of
the 9145E, hardware revision level, serial number, power supplies, and port information. From the System
Configuration menu, select Hardware Information (9) and press Enter. The Hardware Information screen
(Figure 3-21) opens.
NOTE: Parameters and values cannot be changed in this screen.
Figure 3-21 Hardware Information screen
Canoga Perkins Corp. Ethernet Network Interface Device 04-SEP-2008
Model 9145E-101-2-0 V02.10 F121 02: 59: 35
-------------------------------------HARDW ARE INFORMATION---------------------------
NID Model Num ber 9145E-101-2-0
NID Hardware Rev. A2
NID Serial Number 20070412038
SFP Information
User Port Net work Port Multi purpose Port
Model Number SFP1-0045 SFP1-0045 SFP Not Present
Wavelength 850nm MM 850nm MM N/A
Connector Type Duplex LC Duplex LC N/A
Data R at e 1000Mbps 1000Mbps N/A
Maximum Link Length N/A N/A N/A
Maximum Los s Budget 7.5Db 7.5dB N/A
Power Supply A AC 120/240
Power Supply B AC 120/240
Press ESC to return to previous screen
-------------------------------------------Messages------------------------------------------------