Compaq AA-Q88CE-TE User Manual
Page 90
CALL RTR_GET_TID
If neither
/NODE
nor
/CLUSTER
is specified then the command is executed on the
nodes specified by the latest
SET ENVIRONMENT
command. If no
SET ENVIRONMENT
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
. If
node-list
is omitted then the command is executed only on the node where the
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
file-spec
. If
/OUTPUT
or
file-spec
is omitted then the standard or default output is used.
Examples
This command shows the transaction id active on channel ‘‘CLIENT1’’.
RTR> CALL RTR_GET_TID/CHANNEL=CLIENT1
%RTR-S-OK, normal successful completion
tid:
e100b810,0,0,0,0,3bc5,6eb02001
6–14 RTR Command Line Interface