Compaq AA-Q88CE-TE - Manual (Page 214)

SHOW FACILITY
On a frontend, this qualifier can be used to find out whether the node is currently
connected to a router.
Related Commands
• CREATE FACILITY
• DELETE FACILITY
• SHOW LINK
Examples
RTR> SHOW FACILITY/FULL/NODE=BRONZE 1
Facility: FUNDS_TRANSFER 2
Configuration:- 3
Frontend: no Router: yes Backend: yes
Router call-out: no Backend call-out: no
Load balance: no Quorum-check off: no
State:- 4
FE -> TR: unused Router quorate: yes Backend quorate: yes
Quorum threshold: 0 Min broadcast rate: 0
Links:- 5
Link to: bronze
Frontend: no Router: yes Backend: yes
Router -> Frontend:no Frontend -> Router: no
Backend -> Router: yes Router -> Backend: yes
Router quorate: yes Backend quorate: yes
Router current: no Backend coordinator:yes
Link to: airola 6
Frontend: yes Router: no Backend: no
Router -> Frontend:yes Frontend -> Router: no
Backend -> Router: no Router -> Backend: no
Router quorate: no Backend quorate: no
Router current: no Backend coordinator: no
1 Show all facilities in detail.
2 The facility’s name.
3 The facility’s configured roles on this node. In this example, the node is a
router and a backend; load balancing, router callouts and backend callouts
are not enabled.
4 The facility’s state. The router and backend roles are quorate. (Quorate
means that this node’s view of the availability of the other nodes in the
configuration matches that of the other backends and routers. A facility that
is not in the quorate state is effectively unusable.) The quorum threshold is
at the default (zero) and no minimum broadcast rate has been set.
6–138 RTR Command Line Interface