Compaq AA-Q88CE-TE - Manual (Page 114)

CALL RTR_SEND_TO_SERVER
CALL RTR_SEND_TO_SERVER
The CALL RTR_SEND_TO_SERVER command causes a command server to
execute the
rtr_send_to_server( ) routine and to display the returned status.
Format
CALL RTR_SEND_TO_SERVER [message-field1] [,message-field2...]
Parameters
[message-field] [,message-field2...]
Specify the message to be sent as one or more comma separated parameter
values. You can use the /TYPE_OF_DATA and /LENGTH_OF_DATA positional
qualifiers on each parameter value to specify the data type and length of each
field.
Command Qualifiers Defaults
/ACCEPT NOACCEPT
/CHANNEL_NAME=channel-name /CHANNEL_NAME=RTR$DEFAULT_CHANNEL
/CLUSTER /NOCLUSTER
/EXPENDABLE /NOEXPENDABLE
/FORMAT=fmt-string /NOFORMAT
/LENGTH_OF_FIELD=message-lengthDepends on data type; see description.
/NODE[=node-list]
/NODE=default-node-list
/OUTPUT[=file-spec] /OUTPUT=stdout
/READONLY /NOREADONLY
/RETURN_TO_SENDER /NORETURN_TO_SENDER
/TYPE_OF_DATA=data type /TYPE_OF_DATA=STRING
Description
The CALL RTR_SEND_TO_SERVER command causes a command server to
call the rtr_send_to_server( ) routine using values supplied on the command
line.
The numeric status returned from the call is then converted to its textual
representation and displayed.
The rtr_send_to_server( ) routine itself is described in Application
Programmer’s Reference Manual.
The prototype of rtr_send_to_server( ) is:
rtr_status_t rtr_send_to_server (
rtr_channel_t channel,
rtr_sen_flag_t flags,
rtr_msgbuf_t pmsg,
rtr_msglen_t msglen,
rtr_msgfmt_t msgfmt
) ;
Table 6–14 shows the correspondence between values you supply on the command
line and the C language parameter values produced and used for the call.
6–38 RTR Command Line Interface