Compaq AA-Q88CE-TE - Manual (Page 218)

SHOW KEY
SHOW KEY
Display the key definitions created by the DEFINE /KEY command.
Format
SHOW KEY [key-name]
Command Qualifiers Defaults
/ALL /NOALL
/FULL /NOFULL
/OUTPUT[=file-spec] /OUTPUT=stdout
/IF_STATE /NOIF_STATE
Description
The SHOW KEY command shows the key definitions created by the DEFINE /KEY
command.
Parameters
key-name
Specifies the name of the key whose definition you want displayed. See the
description of the
DEFINE /KEY command for a list of the valid key names.
Qualifiers
/ALL
/NOALL (D)
Requests that all key definitions in the current state be displayed. You can use
the /IF_STATE qualifier to request key definitions in other states. Do not specify
a key name with the /ALL qualifier. If no state is specified, all key definitions in
the current state are displayed.
/FULL
/NOFULL (D)
Requests that all qualifiers associated with a definition are displayed. By default,
only the state of the definition and the definition itself are displayed.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file file-spec . If
/OUTPUT or file-spec is omitted then the standard or default output is used.
/IF_STATE=state-name
/NOIF_STATE (D)
Specifies the name of a state for which the specified key definitions are displayed.
State names can be any appropriate alphanumeric string. State names are
created with the
DEFINE /KEY command. If you omit the /IF_STATE qualifier or
use /NOIF_STATE , key definitions in the current state are displayed.
6–142 RTR Command Line Interface