Compaq AA-Q88CE-TE - Manual (Page 290)

RTR Utility Error Messages
%RTR-E-LOCKFAIL, Cannot obtain lock for resource [A]
Explanation: Failed to obtain lock. Enable logging for more information
about error.
%RTR-S-LOGFILSET, Logging to [A]
Explanation: Displays which log files will be used after issuing a "SET
LOG" command with the "/FILE" or "/OPERATOR" or both qualifiers.
%RTR-S-LOGFILSUP, Logging suppressed
Explanation: Indicates that logging is successfully suppressed after issuing
a "SET LOG command" without a "/FILE" or "/OPERATOR" qualifier.
%RTR-E-LOGNOTACT, Logging not active
Explanation: Indicates that logging was not active when a "SHOW LOG"
command was issued.
%RTR-F-MAXPARM, Too many parameters - reenter command with fewer
parameters
Explanation: A command contained more than the maximum number
of parameters allowed. This error can be caused by (1) Leaving blanks
on a command line where a special character (for example, a comma or
plus sign) is required (2) Using symbol names or logical names that, when
substituted or translated, contain embedded blank characters (3) Failing to
place quotation marks around a character string with embedded blanks.
%RTR-E-MAXTOOSMA, Maximum number of blocks may not be less than
/BLOCKS
Explanation: The number of blocks specified with the /MAX_BLOCKS
qualifier in the CREATE JOURNAL or MODIFY JOURNAL command was
lower than the number of blocks specified with the /BLOCKS qualifier.
%RTR-E-MONCMPERR, Syntax error in command at line [A] in file [A]
Explanation: error found compiling a MONITOR definition file.
%RTR-E-MONNOTACT, Monitor is not active, first use the "MONITOR"
command
Explanation: A SCROLL or PRINT command was issued before any monitor
picture had been displayed.
%RTR-E-MSGDATILL, Unable to convert string [A] to [A]
Explanation: The string [A] could not be converted to data type [B]. The
subsequent message gives the reason.
%RTR-E-MSGTOOBIG, The number of bytes in message exceeds the maximum
of %u
Explanation:
%RTR-W-NAMERR, Node name to address lookup error
Explanation: Error encountered whilst looking up a node address - details
follow in a subsequent message text.
D–14 RTR Utility Error Messages