Cabletron Systems CSX400 - Manual (Page 97)

Index-1
Index
A
Add Circuits button 4-24
add circuits to a frame relay interface 4-24
Add Frame Relay Circuits window 4-25
Add to Static Table button 3-26
Addr 4-19
AddrLen 4-19
Admin button 3-8
Ageing Time 3-22, 3-24
All Filters button 3-18
All Paths Explorer (APE) packet 3-37
Apply button 3-18
B
BPDU ageing timer 3-30
Bridge Port box 3-7
color coding 3-7
bridge port Color codes 3-40
Bridge Port Display Info 3-44
bridge port state 3-8
blocking 3-9
broken 3-9
disabled 3-8
forwarding 3-9
learning 3-9
listening 3-9
bridge port status 3-8
disabled 3-8
enabled 3-8
bridge port TrafÞc levels 3-39
Bridge Protocol Data Units (BPDUs) 3-2, 3-28
Bridge Statistics window 3-13
accessing 3-13
Bridge Status window
setting and changing information 3-12
Bridge TrafÞc View buttons 3-7
Bridge View 2-2, 2-3
access levels 3-3
changing front panel information 3-12
launching 3-2
bridging type 3-14
transparent-only 3-14
C
change the Dynamic Ageing Time 3-25
Changing Polling Intervals 3-43
changing the Circuit ID 4-8
changing the Line Code 4-8
Charts, Graphs, and Meters 1-3
CIR (Committed Information Rate) 4-23
Circuit ID 4-7
clear network logs 3-42
Clock Source 4-7
Committed Burst 4-23
Community Names 1-3
Compression 4-11
ConÞguration BPDU 3-30, 3-31
ConÞguring the Circuits 4-24
ConÞguring the Frame Relay Protocol 4-20
conÞguring the interfaces on the
WAN port 4-9
ConÞguring the Synchronous Port 4-6
ConÞguring the T1 Port 4-8
ConÞguring the WAN Interfaces 4-11
Conn# 4-9
Contact Status 3-5
Create 4-23
CSX Bridge View 2-2, 2-3
CSX Þrmware versions 1-7
CSX200 family and CSX400, descriptions 1-1
CSX400, description 1-1
Cts Enable 4-5
Current box 3-40
D
decLb100 3-29
Delay box 3-40
DelayExceedDiscard 3-14
deleteOnReset entry status 3-24, 3-27
deleteOnTimeout entry status 3-24, 3-27
Delta button 3-8, 3-9
Designated Bridge 3-28, 3-34
Designated Cost 3-34
Designated Port 3-28, 3-34
Designated Root 3-29, 3-34