Cabletron Systems CSX400 - Manual (Page 26)

CSX Bridge View
3-6 Accessing the Bridge Traffic View Window
IP Address
The deviceÕs Internet Protocol address. You cannot change the IP address from
SPMA. For multi-interface devices, this will be the IP used to deÞne the device
icon (if you are using a management platform) or the IP used to launch the
application (if you are running in stand-alone mode).
MAC Address
The deviceÕs factory-set MAC hardware address.
Clicking on the Device button displays the Device menu. The Device menu lets
you perform the following (depending on what is supported by your device):
¥ Open the Bridge Status window.
¥ Display a summary of bridge statistics.
¥ Open the Filtering Database window.
¥ Open the Find MAC Address window.
¥ Open the Special Database window.
¥ Open the Spanning Tree Protocol window.
¥ Open the Polling Intervals window.
If you need to call CabletronÕs Global Call Center about a problem with the Bridge
View, youÕll need the information provided in the Information window:
Figure 3-2. Bridge Information Window
NOTE
It is possible you may also see a menu selection for SmartTrunk. Please be aware that the
SmartTrunking feature is not supported by the CSX200/400.
Bridge firmware
revision
SPMA Bridge
View version