Cabletron Systems CSX400 - Manual (Page 93)

Checking Statistics 4-29
CSX WAN Configuration
virtual circuit was created. BECNs are sent by the network to notify the CSX that
congestion avoidance procedures should be initiated when it is sending data.
XmtFrame
Displays the number of frames transmitted from this virtual circuit since it was
created.
XmtOctets
Displays the number of octets transmitted from this virtual circuit since it was
created.
RcvFrame
Displays the number of frames received over this virtual circuit since it was
created.
RcvOctets
Displays the number of octets received over this virtual circuit since it was
created.
Creating Meters
By clicking on from the Frame Relay Circuit Counters window, you can
display a window containing a meter for each of its statistics. See Figure 4-14 on
the following page for an example of the meters that you can create.
For more information on using meters and understanding how to read the
information displayed, refer to the Charts, Graphs, and Meters chapter in the
SPMA Tools Guide
.