Cabletron Systems CSX400 - Manual (Page 63)

Changing Polling Intervals 3-43
CSX Bridge View
To save log Þles:
1. Click on the Save button and select either Current Log or All Logs to open
the Save Log window.
2. In the Save Log window, enter a file name for the file to be saved and then
click on the OK button. The default directory for saved log files is the current
directory. To specify a different directory, include the path name with the log
file name.
To disable the Forwarding Log of all bridge ports or individual bridge ports:
1. Click button 1 on the appropriate Bridge Port entry to select it.
2. Click button 3 on the Port Menu button to display the Bridge Port menu.
3. In the Port menu, click button 3 on Forwarding Thresholds and then drag
right to either Transparent or Source Routing.
4. In the Forwarding Thresholds window, deselect the Log Changes in State
box.
5. Click on the Apply button and then click on either Selected Only or All.
Changing Polling Intervals
Much of the information displayed in the Bridge TrafÞc View is gathered
periodically rather than continuously. You can edit the times between these
periodic polls.
To edit the polling times:
1. Display the Device menu by clicking on the Front Panel button.
2. Drag down to Polling Intervals and release. The Polling Intervals window
displays.
Figure 3-19. The Polling Intervals Window
3. Highlight and edit the Device Info and Bridge Port Display Info boxes and
then click on the Apply button to save changes.